Products

  • Handle SL105

    Size : A1500 x B1300 x C38*25 X D75
    Color: Satin
    Material: Stainless Steel

  • Heat Strengthened Glass

    Heat Strengthened Glass is a heat treated glass with a residual surface compression greater than 3,500 psi and less than 10,000 psi, or edge compression greater than 5,500 psi and less than 9,700 psi. This glass complies with stringent internationally standards such as ANSI 97.1, BS 6206 and AN/NZS 2208.

    Heat Strengthened Glass has a lower residual stress and is only 2 times stronger than ordinary glass. It is not considered a safety glass (if use in single piece) and if broken, forms large pieces.

    • Feature
    1. Twice as strong as annealed glass from the same thickness.
    2. Higher bending strength and more resistant.
    3. Heat strengthened glass offers good resistance to thermal stress.
    • Application

    When heat treated glass is necessary, CSSG recommends the use of heat strengthened glass for applications   that  do not specifically require a safety glass product.

  • Insulation Glass

    Insulation glass comprises of two or more layers of glass separated by desiccant-filled spacer and sealed with sealants.

    • Features
    1. Reducing the heat gain and heat loss.
    2. Preventing the vapor condensation.
    3. Helps in sound insulation and improves the acoustics of the place.
    4. Reduction in the amount of the direct sunlight and UV rays.
    5. Can act as a safety and security window, depending on the composition of glass layers.
    • Application
    1. Use in all construction projects which required strict control on temperature and noise such as office high-rise building, hotel, commercial center, hospitals.
  • Laminated Glass

    Laminated glass is produced by permanently bonding two or more layers of glass together with tough layers of Polyvinyl Butyral (PVB) under heat and pressure, to create a single sheet of glass. When broken, the PVB interlayer keeps the layers of the glass bonded and prevent it from breaking apart.

    CSSG laminated glass is a safety glazing materials that is tested by TUV-Rheinland that conform to international standards such as ANSI Z-97.1, BS 6206 and AN/NZS 2208.

    • Features
    1. If broken, the glass fragments remain bonded to the interlayer, minimizing the risk of injuries.
    2. Protection from intrusion.
    3. Residual load + extraordinary strength + prevention from falling.
    4. 98% UV-control, one way or another.
    5. Could withstand bullets, blasts and hurricane.
    6. An excellent barrier to noise.
    7. Reduce heat gain from sunlight to lower air conditioning costs.
    8. Laminated glass is durable, maintaining its color and strength.
    9. Laminated glass is very easy to install.
    10. Transparency + visibility.
  • MC-800 Acrylic Latex Sealant

    MC-800 is a one-part paintable, water base acrylic sealant. It will cure and form a flexible tough rubber. MC-800 is a cost-effective and environmental friendly sealant. Good adhesion to most surfaces like wood, concrete, glass, ceramic, granite and marble, etc.

  • MC-807 Acrylic Latex Sealant – Gap Filler

    MC-807 is a one component, latex non-staining material that cures into a flexible and tough rubber with good adhesion to porous surfaces without primer gasket. It shows excellent UV Resistance and will not crack even after many years of outdoor exposure. It is also an environmental friendly sealant that can be easily cleaned up with water. Can be painted over in short time with latex or oil base paint.

  • MS-602 MS Polymer Sealant – Low Modulus

    MS-602 is based upon Hybrid Silyl Modified Polyether Technology. It is a neutral, single component, low modulus with high movement capability joint sealant. It has an outstanding bond strength and primerless adhesion on various types of substrates. It can be painted with most kinds of paints and has superior weatherability in all climates. It will not form bubble within sealant even in a high temperature and humidity applications or apply on moist surfaces. It is a high performance flexible elastic sealant suitable for all kinds of applications and conditions.

  • PA -PREMIUM ACETOXY

    Wacker PA is one-part, acid-curing, high-modulus silicone sealant for glazing and industrial applications.

    + Application

    • Glass and windows construction
    • Sealing of joints between glazing and supporting structure (frame, transoms, millions)
  • Pillar BY1

    Code : Ac-L-SGB-037-5
    Color : Satin
    Material : Stainless / Tube

  • Pillar Glass 2051

    Code : Ac-L-SGB-039-2
    Color : Satin
    Material : Stainless / Tube

  • SA-101 100% RTV ACETOXY SILICONE

    SA-101 is a one part, high performance 100% RTV Acetic Silicone Sealant. It is suitable for a wide range of sealing and glazing applications where durability and reliability is required. It has superior resistant to UV-Radiation, Vibration and weathering, etc. It will not sag and adheres to a variety of non-porous substrates such as glass, ceramic, tiles, aluminum, fiberglass, non-oily wood, etc.

  • SG 79 – Structural Glazing

    This is a high-strength onepart neutral cure sealant for structural glazing and curtainwall expansion joints.

    + Application

    • Structural Glazing